Skip to content
Real Estate Tech

How Much Is Heat in This Apartment? Chicago Landlord Guide

TL;DR

  • "How much is heat here?" comes up in almost every Chicago winter inquiry.
  • When the City's heating cost disclosure applies, where landlords get the number, when to hand it over, and how to answer by text without guessing.
On this page
  1. How Much Is Heat in This Apartment? Chicago Landlord Guide
  2. Why renters ask
  3. When the Chicago disclosure applies
  4. Where the number comes from
  5. What happens if it's skipped
  6. Larger buildings: the energy rating placard
  7. Write your heat facts once
  8. Answer the question that was asked
  9. A sample heat reply (example)
  10. Where Sarah AI fits (and where it doesn't)
  11. Related reading
  12. FAQ
  13. Book a demo
Navy and teal illustration of a Chicago walk-up apartment on a snowy evening with a glowing radiator and wall thermostat, next to a smartphone text thread with flame and receipt icons, a signed document card with a check mark, and a gas meter icon.

How Much Is Heat in This Apartment? Chicago Landlord Guide

How much does heat cost in this Chicago apartment, and does the landlord have to tell me? If the unit's heat is on its own meter and the tenant pays the utility directly, yes. Chicago's Municipal Code says the landlord must tell the applicant in writing that heat is the tenant's responsibility, and give the annual cost of the primary heat source based on the previous 12 months, before signing a lease or accepting any application money. The tenant signs a receipt for it. So when a renter texts "how much is heat?", the best answer is a real number from the utility, not "it's pretty reasonable." As the landlord or leasing agent, your job is to have that number on file before the inquiries start.

This guide is for Chicago landlords, small property managers, and leasing agents who answer their own rental texts. It cites the Chicago Municipal Code and City of Chicago and utility pages, and it isn't legal advice.

Why renters ask

In winter, heat often comes up before the showing. The real questions underneath are:

  • "Is heat included?" Many renters compare a heat-included unit against a cheaper one where they pay gas.
  • "If I pay it, what will it run me in January?" They're budgeting rent plus utilities, not rent alone.
  • "Gas or electric?" Electric heat and gas heat feel very different on a winter bill, and some renters have been burned before.

A specific reply ("Heat is gas, paid by the tenant to Peoples Gas. I'll send you the City heating cost disclosure with last year's cost") answers all three. "Heat's cheap here" answers none of them, and it may not match the number you're legally required to hand over anyway.

When the Chicago disclosure applies

Chapter 5-16 of the Municipal Code (Chicago Municipal Code 5-16-010) covers a dwelling unit where utility service for heat is individually metered to the unit and the tenant is directly responsible to the utility for paying for heat. In that case, the owner or agent can't sign an oral or written lease, a contract to lease, or accept money in an application without first disclosing in writing:

  1. That the cost of heating is the tenant's responsibility, and
  2. The annual cost of service from the utility providing the primary source of heat, based on energy use during the previous twelve months.

The tenant or applicant signs a receipt acknowledging the disclosure.

The ordinance lists two exceptions:

  • Same tenant, renewing. A tenant who stays on and already paid the heat directly during the previous term.
  • Shared central heat. Condo, co-op, or other units where heat is provided centrally by the landlord or building management and the cost is shared on a basis not tied to the individual unit's usage, such as floor space.
Example conversationScripted
Is this home still available?
Hi, I'm Sarah, an AI assistant. Which address did you see?
Example conversation. Sarah is AI.

The City's Heating Cost Disclosure Rules add detail. They say the disclosure is needed for a first-time lease between that owner and tenant on a unit (not renewals), that it must be provided before any written or verbal agreement and before any exchange of money, and that it should be written into the lease or attached to it by reference. The rules also say centrally supplied heat that's billed back to tenants by submetering or another usage-based method is not exempt. In that setup the landlord or building management counts as the "utility" for the disclosure. If your building bills heat back that way, ask an Illinois attorney how to handle it.

Where the number comes from

The ordinance lets the owner or agent get the 12-month figure from an online website, or from the utility at no cost on a written request that states they're the owner or the owner's agent. The utility has two weeks to respond, and the information is good for disclosure purposes for six months from the date you get it (Chicago Municipal Code 5-16-030). The disclosure won't show the former occupant's name or payment record.

  • Gas heat. Peoples Gas says real estate agents or property owners can request heating cost disclosures for residential heating accounts. You need a My Account to request it online. Otherwise, you can email the completed City of Chicago disclosure application to the address on that page.
  • Electric heat. The City's Chicago Heating Cost Disclosure Form routes electric heat requests to ComEd and gas heat requests to Peoples Gas, and needs a separate application for each.

Two practical points. First, the six-month window means a disclosure you pulled in May is stale by December, so put a "pulled on" date next to it. Second, the utility's figure isn't a promise of future bills. The ordinance says it's not an offer or guarantee by the utility, so present it as last year's cost, not next year's.

What happens if it's skipped

An owner or agent who fails to provide the information, or falsifies it, can be fined up to $500 per offense. It's an affirmative defense if the utility didn't respond on time to a properly made request (Chicago Municipal Code 5-16-070). So request early, and keep a copy of your request.

Larger buildings: the energy rating placard

If you lease units in a large building, there's a second energy item. The City's Chicago Energy Rating page says buildings covered by the Energy Benchmarking Ordinance (most properties of 50,000 square feet or more) receive a rating placard each year, must post it in a prominent location, and must share the placard or rating when the property is listed for sale or lease. It's a building-level rating, not a unit heating bill, so it doesn't replace the heating cost disclosure.

Write your heat facts once

Before the first inquiry, write these down for each unit so every renter gets the same answer:

  1. Who pays heat: included in rent, or tenant pays the utility directly.
  2. Fuel and utility: gas (Peoples Gas) or electric (ComEd), or central building heat.
  3. The disclosure: the 12-month annual cost from the utility, and the date you pulled it.
  4. Other utilities: who pays electricity, water, and cooking gas, if different.
  5. Thermostat: whether the tenant controls it.
  6. When you send the form: for example, with the application link, before any fee is collected.

Put items 1 and 2 on the listing itself. It saves a round of texts.

Answer the question that was asked

A few rules keep heat replies accurate:

  • Don't round off the disclosure. Quote the figure from the utility's disclosure, or say you'll send the form. Don't swap in "about $50 a month" from memory.
  • Don't promise a bill. Last year's usage depended on last year's occupant and last year's weather.
  • Send the form before any money. If a renter wants to apply tonight, send the disclosure with the application, not after the fee clears.
  • Same answer for everyone. Whatever you send one renter for a unit, send the next one too.

A sample heat reply (example)

Sample only. The unit, the provider details, and the bracketed amount are placeholders, not real figures:

Renter: Is heat included in the 2-bed? How much is it in winter?

Landlord: Heat isn't included. It's gas heat on the unit's own meter, paid by the tenant to Peoples Gas. Under Chicago's heating cost disclosure, last year's annual heating cost for this unit was [annual amount from the disclosure], pulled from Peoples Gas on [date]. That's last year's usage, not a guarantee. I'll send you the disclosure form with the application, and you'll sign a receipt for it before anything is paid. Want to see the unit first? I have Saturday at 11 or 1.

Where Sarah AI fits (and where it doesn't)

Sarah AI is a 24/7 SMS assistant for Chicago real estate agents, small brokerages, property managers, and landlords. It says it's an AI assistant, replies to rental texts, asks move-in date, budget, bedrooms, area, and pets, matches listings from your Google Sheet, offers open showing times from your Google Calendar, and alerts you.

On heat questions specifically:

  • It only states what's on the listing. Sarah answers from the fields you fill in on your Google Sheet. It won't state utilities unless they're written in a filled field, like the description. "Heat: gas, tenant pays Peoples Gas" in your description is something it can repeat. A blank field gets "I don't have that detail, the agent will confirm," plus an offer to book a showing.
  • It doesn't send the disclosure. The heating cost disclosure and the signed receipt are yours to send and collect. Sarah doesn't send documents, take applications, or collect money.
  • It hands off fees and legal questions. Questions about fees, deposits, application steps, or what the law requires go to you. Sarah says it can't give legal advice.

So the heat answer stays yours, written from the utility's numbers. See how it works for property managers and real estate agents, or read about Sarah in Chicago.

FAQ

Does a Chicago landlord have to tell renters how much heat costs?

Yes, when the unit's heat is individually metered and the tenant pays the utility directly. Chicago Municipal Code 5-16-010 requires a written disclosure that heat is the tenant's responsibility and the annual cost of the primary heat source based on the previous 12 months, before a lease is signed or application money is accepted. The tenant signs a receipt.

When doesn't the heating cost disclosure apply?

The ordinance exempts a renewing tenant who already paid heat directly, and units with central heat whose cost is shared on a basis not tied to the unit's usage, such as floor space. The City's rules say heat billed back by submetering or another usage-based method is not exempt.

How do Chicago landlords get the heating cost number?

From the utility's website or a free written request to the utility, which has two weeks to respond. Peoples Gas handles gas heat requests and ComEd handles electric heat. The figure is valid for disclosure purposes for six months.

Can Sarah AI answer heat questions for my listings?

Only from what's written on your listing sheet. If "heat included" or "tenant pays gas heat" is in a filled field, Sarah can repeat it. Otherwise it says the agent will confirm and offers a showing. The disclosure form and receipt stay with you.

Book a demo

Want rental texts answered around the clock, with the facts you've written down and the hard questions passed to you? Book a demo. Or text the demo line at +1 (844) 681-7964 to see what a renter sees.

Related

Shubham Mane

Co-founder, NextGen Fusion AI

Text Sarah now.

Free 2-week supervised pilot.

(844) 681-7964
Scan with your phone camera.

Sarah is AI. Reply STOP anytime.